best video phone

ritsadmin · 10-11-2009, 02:27 AM

I am looking for a high quality video sip phone (h264/h263) ideally with a tactile screen.
I have tested a grandstream gvx3005 and with the later firmware it does what it says but let's say it's not that sexy.

I'm considering the following but no one wants to loan me one to test !

Grandstream GVX3140 - looks better....no tactile

Snom 870

http://www.snom.com/en/products/snom...een-voip-phone
- But i don't think it has any native video codecs (camera it less important) as typical useage will be to view a mobotix ip gate camera.

Polycom VVX1500
http://www.polycom.com/products/voic...s/vvx1500.html
- But no tactile screen

Nortel 1535

http://products.nortel.com/go/produc...0&locale=en-US

looks nice but no tactile

Any comments on any of the above phones or some good alternatives known to work with the quadro would be welcome.

Regards
Nish

davrays · 10-15-2009, 07:40 PM

Nish, as far as I know Polycom VVX1500 does have touch-sensitive display (at least it reacts on my finger touch.. not sure about yours

).

That phone is the one, which is best tested with Quadro for compatibility (and we have specially finetuned our software to work best with that phone). So I would recommend you to pay more attention on that one.

Best regards,
David

paolo4930 · 02-19-2010, 08:47 AM

Nortel 1535 is a best video phone. So please try to concentrate on this phone more.Thank you .

carped · 02-22-2010, 11:26 AM

Hello,

GXV3140 is wonderful, could you tried to do something for it, it deserves.

Regards,
Florent H.

SITEL S.A · 02-24-2010, 09:46 PM

The model tandberg e20 is compatible with epygi there is a link:

http://www.tandberg.com/products/tandberg_e20.jsp

regards

KSComs · 02-25-2010, 06:39 AM

Actually I have installed the prior versions that have h323 and sip compatability onto another branded IP PBX that works well...
I am sure it should work as other and with H263/264 support ...

Kev

warren · 03-04-2010, 08:56 PM

Epygi is also working on support for the Yealink VP-2009 SIP Video Phone.

Today we plan to support the Polycom VVX1500 and future version, Yealink VP-2009, and snom 870. Since Epygi is purely standards based, any h.263 and h.264 conforming to the SIP standard should work with our IP PBX solutions.

KSComs · 03-05-2010, 08:03 AM

Quote:

Originally Posted by warren

Since Epygi is purely standards based, any h.263 and h.264 conforming to the SIP standard should work with our IP PBX solutions.

ummm ... Epygi is purely standards based ? or the Quadro's

Regards

Kev

KSComs · 04-04-2010, 01:40 AM

Be careful when you google Hernandez's suggestion ...

Here is what Google warns about some of the sites for ACN

http://www.google.com/safebrowsing/d...der.com/&hl=en

Regards

Kevin

wquarre · 06-06-2010, 09:37 PM

Hi, any information about when the Grandstream GXV-3140 wil be in the auto-provisioning list for the Quadro ?
I am using it (not yet with Epygi because I just bought a Quadro and try to make the settings !-) and must say that this model is quite popular here.

10-11-2009, 02:27 AM	#1
ritsadmin Member Join Date: Aug 2006 Location: Mougins Posts: 38	best video phone I am looking for a high quality video sip phone (h264/h263) ideally with a tactile screen. I have tested a grandstream gvx3005 and with the later firmware it does what it says but let's say it's not that sexy. I'm considering the following but no one wants to loan me one to test ! Grandstream GVX3140 - looks better....no tactile Snom 870 http://www.snom.com/en/products/snom...een-voip-phone - But i don't think it has any native video codecs (camera it less important) as typical useage will be to view a mobotix ip gate camera. Polycom VVX1500 http://www.polycom.com/products/voic...s/vvx1500.html - But no tactile screen Nortel 1535 http://products.nortel.com/go/produc...0&locale=en-US looks nice but no tactile Any comments on any of the above phones or some good alternatives known to work with the quadro would be welcome. Regards Nish

02-22-2010, 11:26 AM	#4
carped Junior Member Join Date: Jun 2008 Posts: 5	Gvx3140 Hello, GXV3140 is wonderful, could you tried to do something for it, it deserves. Regards, Florent H.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Video Call and QUADRO	Janousek2	Troubleshooting and Problems	9	03-04-2010 12:47 PM
Quadro with video phones (AuPix AP-100)	Totalcomsol	Hardware Interoperability	2	10-09-2006 08:42 AM
Quadro with Video Phones	jcuellar	Suggestions and Feedback	1	10-03-2006 11:05 AM

10-15-2009, 07:40 PM	#2
davrays Quadro Architect Join Date: Jun 2006 Location: Around myself Posts: 2,083	Nish, as far as I know Polycom VVX1500 does have touch-sensitive display (at least it reacts on my finger touch.. not sure about yours ). That phone is the one, which is best tested with Quadro for compatibility (and we have specially finetuned our software to work best with that phone). So I would recommend you to pay more attention on that one. Best regards, David

02-19-2010, 08:47 AM	#3
paolo4930 Junior Member Join Date: Feb 2010 Posts: 3	Nortel 1535 is a best video phone. So please try to concentrate on this phone more.Thank you .

02-24-2010, 09:46 PM	#5
SITEL S.A Junior Member Join Date: Jan 2010 Posts: 5	The model tandberg e20 is compatible with epygi there is a link: http://www.tandberg.com/products/tandberg_e20.jsp regards

02-25-2010, 06:39 AM	#6
KSComs Senior Member Join Date: Jul 2007 Location: Oakleigh, Victoria Posts: 1,485	Actually I have installed the prior versions that have h323 and sip compatability onto another branded IP PBX that works well... I am sure it should work as other and with H263/264 support ... Kev

03-04-2010, 08:56 PM	#7
warren Member Join Date: Jun 2006 Location: Dallas, Texas Posts: 75	Epygi is also working on support for the Yealink VP-2009 SIP Video Phone. Today we plan to support the Polycom VVX1500 and future version, Yealink VP-2009, and snom 870. Since Epygi is purely standards based, any h.263 and h.264 conforming to the SIP standard should work with our IP PBX solutions.

04-04-2010, 01:40 AM	#9
KSComs Senior Member Join Date: Jul 2007 Location: Oakleigh, Victoria Posts: 1,485	Be careful when you google Hernandez's suggestion ... Here is what Google warns about some of the sites for ACN http://www.google.com/safebrowsing/d...der.com/&hl=en Regards Kevin

06-06-2010, 09:37 PM	#10
wquarre Junior Member Join Date: Jun 2010 Posts: 2	Hi, any information about when the Grandstream GXV-3140 wil be in the auto-provisioning list for the Quadro ? I am using it (not yet with Epygi because I just bought a Quadro and try to make the settings !-) and must say that this model is quite popular here.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)