FXO lines not releasing

neilh · 02-23-2012, 07:35 PM

I have a Quadro 6L with the latest firmware. 4 FXO lines are connected and I have to continually reboot the unit as after a call is terminated the FXO port does not release. After a period of time all 4 lines become unavailable and I need to reboot

Were do I need to look for a solution to this. Please help

hrant · 02-25-2012, 11:54 AM

Does't the FXO release the line even if you hang up the IP phone on local extension?

neilh · 02-27-2012, 08:14 AM

Even after hanging up the IP phone on a local extension, sometimes the FXO does not release and after some time all 4 lines become unavailable and the unit needs to be rebooted

hrant · 02-28-2012, 09:52 AM

Try to unplug the cable from FXO port and make call to that line. Do you hear normal ringback tone? Put the cable back and make another call, do you hear busy tone now?

02-23-2012, 07:35 PM	#1
neilh Junior Member Join Date: Jun 2008 Posts: 9	FXO lines not releasing I have a Quadro 6L with the latest firmware. 4 FXO lines are connected and I have to continually reboot the unit as after a call is terminated the FXO port does not release. After a period of time all 4 lines become unavailable and I need to reboot Were do I need to look for a solution to this. Please help

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Adding IP Lines resets extension configuration for previously added lines	bowzak	Installation	3	09-29-2010 06:52 PM
Allocating Lines	Linds	'How Do I' Questions	2	03-13-2009 12:09 AM
2xi analog lines	zero	Installation	6	11-26-2008 07:57 PM
Allow other lines to use SIP	sharkbyte	'How Do I' Questions	2	04-11-2008 07:41 AM
More FXS lines	gejac	'How Do I' Questions	4	05-14-2007 01:47 AM

02-25-2012, 11:54 AM	#2
hrant Administrator Join Date: Sep 2006 Posts: 506	Does't the FXO release the line even if you hang up the IP phone on local extension?

02-27-2012, 08:14 AM	#3
neilh Junior Member Join Date: Jun 2008 Posts: 9	Even after hanging up the IP phone on a local extension, sometimes the FXO does not release and after some time all 4 lines become unavailable and the unit needs to be rebooted

02-28-2012, 09:52 AM	#4
hrant Administrator Join Date: Sep 2006 Posts: 506	Try to unplug the cable from FXO port and make call to that line. Do you hear normal ringback tone? Put the cable back and make another call, do you hear busy tone now?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)