Tunnel V Trunk

debjy · 10-30-2007, 03:24 AM

Now on a 4x4 the sipt trunk has been renamed to a sip tunnel.

on my 2x it is still a sip trunk.

The user name is greyed out in both devices . I can no longer create the trunks(tunnels) between the two with a common username.

Thanks

AramK · 10-30-2007, 05:15 AM

The "SIP Tunnel" was renamed to "SIP Trunk" to avoid a misunderstunding from customers side, because some ITSPs offer SIP tunneling. The reason for the difference you have on your Quadros is the different SW versions. The GA image 4.1.38 for 2x will be available soon, and you'll have there also "SIP Tunnels"too. Probably you haveupgraded your Quadro4x4 to the 4.1.38 already. We are sorry for inconvenience, butyou mustwait for the 4.1.38 release for 2x. Another solution is to downgrade you 4x4, but only in case if youhave old configuration back-uped, asdowngrade will erase your existing configuration.

Frontier · 10-31-2007, 09:27 AM

Hi,

Actually in the UK a lot of our ITSPs offer a "Sip Trunk" service... :O)

Couldn't we call it a Sip-Link / Suo-Route or something!!

AramK · 10-31-2007, 10:06 PM

We know about that

That was the reson for renaming "SIP Trunk" to "SIP Tunnel". Started from 4.1.38 release all the Quadro products will have "SIP Tunnel".

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
trunk seizure prefixes	ssteiner	'How Do I' Questions	4	10-12-2007 07:36 AM
How can I do SIP trunk to a SIP Provider	christophe	'How Do I' Questions	3	08-13-2007 06:12 PM
Sip trunk to Sip Trunk transfer	definitel	Problem Report	1	03-31-2007 07:09 PM
Transfers fail on SIP trunk	oltconsulting	Troubleshooting and Problems	6	10-21-2006 04:38 PM
SIP Trunk	jimjimk	'How Do I' Questions	2	10-04-2006 05:17 AM

10-30-2007, 03:24 AM	#1
debjy Junior Member Join Date: Aug 2006 Location: NSW Posts: 4	Now on a 4x4 the sipt trunk has been renamed to a sip tunnel. on my 2x it is still a sip trunk. The user name is greyed out in both devices . I can no longer create the trunks(tunnels) between the two with a common username. Thanks

10-30-2007, 05:15 AM	#2
AramK Senior Member Join Date: Sep 2006 Location: Yerevan Posts: 796	The "SIP Tunnel" was renamed to "SIP Trunk" to avoid a misunderstunding from customers side, because some ITSPs offer SIP tunneling. The reason for the difference you have on your Quadros is the different SW versions. The GA image 4.1.38 for 2x will be available soon, and you'll have there also "SIP Tunnels"too. Probably you haveupgraded your Quadro4x4 to the 4.1.38 already. We are sorry for inconvenience, butyou mustwait for the 4.1.38 release for 2x. Another solution is to downgrade you 4x4, but only in case if youhave old configuration back-uped, asdowngrade will erase your existing configuration.

10-31-2007, 09:27 AM	#3
Frontier Junior Member Join Date: Jun 2006 Location: Berkshire Posts: 10	Hi, Actually in the UK a lot of our ITSPs offer a "Sip Trunk" service... :O) Couldn't we call it a Sip-Link / Suo-Route or something!!

10-31-2007, 10:06 PM	#4
AramK Senior Member Join Date: Sep 2006 Location: Yerevan Posts: 796	We know about that That was the reson for renaming "SIP Trunk" to "SIP Tunnel". Started from 4.1.38 release all the Quadro products will have "SIP Tunnel".

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)