Grandstream not reregistering

joeltric · 08-31-2007, 06:11 AM

My bt 100 phones when configured to many ext.ring drops its regs. overnite. I upgraded the firmware to v1.0.8.33 and they stay registered. When I autoconfig. with quadro the firmware reverts back to the old version and reg. problem returns. Call park sure is problem

AramK · 09-04-2007, 05:45 AM

Hi, what is the firmware version of your Quadro ? Is it 2x or 4x/16x ? The version v1.0.8.33 is our recommended one, it is tested in our lab to have no problem with Quadro, so you must use that version. What is the old version, that the phone reverts back ? Actually there is no Firmware version Control for BT100 phones in Quadro, so it is obviously not the Quadro is doing firmware downgrade. Are the phones configured with Quadro via Autoprovisioning or you have configured them in manula way ? We suggest to and reset the phone first and use Autoprovisioning.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Support for Grandstream GXP 2000	GeckoBlue	Hardware Interoperability	11	02-12-2008 11:05 AM
Problems with Grandstream IP Phone	quadro2net	Hardware Interoperability	9	01-01-2008 03:17 AM
Grandstream Interoperability	warren	Announcements	0	07-18-2007 11:48 AM
grandstream budgettone 102	Lionel	Hardware Interoperability	2	08-27-2006 11:02 PM

08-31-2007, 06:11 AM	#1
joeltric Junior Member Join Date: Nov 2006 Location: Vicksburg Posts: 3	My bt 100 phones when configured to many ext.ring drops its regs. overnite. I upgraded the firmware to v1.0.8.33 and they stay registered. When I autoconfig. with quadro the firmware reverts back to the old version and reg. problem returns. Call park sure is problem

09-04-2007, 05:45 AM	#2
AramK Senior Member Join Date: Sep 2006 Location: Yerevan Posts: 796	Hi, what is the firmware version of your Quadro ? Is it 2x or 4x/16x ? The version v1.0.8.33 is our recommended one, it is tested in our lab to have no problem with Quadro, so you must use that version. What is the old version, that the phone reverts back ? Actually there is no Firmware version Control for BT100 phones in Quadro, so it is obviously not the Quadro is doing firmware downgrade. Are the phones configured with Quadro via Autoprovisioning or you have configured them in manula way ? We suggest to and reset the phone first and use Autoprovisioning.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)