Set up global speed-dial entries

brian · 01-28-2007, 08:28 PM

The setup is:
- Quadro 16x
- 3 6FXOs
- 32 port FXS gateway

The customer has over 150 frequently dialled numbers and wants to have
them accessible via speed-dial. For two reasons:
1) to restrict users from dialling any external number from their
extensions (number not in speed-dial would be accessed via operator)
2) to allow them to quickly access business-critical numbers without
having to go via the operator

I tried to do this via Call routing but as we put in entries the whole system
slowed down and lost performance. How do I get this set up?

Brian

davrays · 02-05-2007, 06:42 AM

Hi Brian

yep, the Call Routing Table is the right place to do such things (you can use also "Speed Dial" service on the extesnion, but it is really too much work to configure that for every extension).

In the 4.0 SW series, indeed, having many routing records slows down the system. In 4.1 SW this is fixed, however, so you can use this setup with 4.1.

Best regards,

David

Edited by: davrays

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Speed Dial	centina	'How Do I' Questions	3	11-20-2007 10:24 PM
global call blocking	mauriceatkinson	'How Do I' Questions	1	12-21-2006 08:29 AM
Speed Calling	danit	General Discussions	1	11-19-2006 07:34 AM
Speed Calling	debjy	'How Do I' Questions	1	10-03-2006 11:33 PM
Speed Dialing	cgaunt	'How Do I' Questions	1	06-21-2006 02:40 AM

01-28-2007, 08:28 PM	#1
brian Junior Member Join Date: Jul 2006 Location: Nairobi Posts: 3	The setup is: - Quadro 16x - 3 6FXOs - 32 port FXS gateway The customer has over 150 frequently dialled numbers and wants to have them accessible via speed-dial. For two reasons: 1) to restrict users from dialling any external number from their extensions (number not in speed-dial would be accessed via operator) 2) to allow them to quickly access business-critical numbers without having to go via the operator I tried to do this via Call routing but as we put in entries the whole system slowed down and lost performance. How do I get this set up? Brian

02-05-2007, 06:42 AM	#2
davrays Quadro Architect Join Date: Jun 2006 Location: Around myself Posts: 2,083	Hi Brian yep, the Call Routing Table is the right place to do such things (you can use also "Speed Dial" service on the extesnion, but it is really too much work to configure that for every extension). In the 4.0 SW series, indeed, having many routing records slows down the system. In 4.1 SW this is fixed, however, so you can use this setup with 4.1. Best regards, David Edited by: davrays

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)