|
|
|||||||
| FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
04-01-2009, 02:48 PM
|
#1 |
|
Junior Member
Join Date: Apr 2009
Posts: 5
|
Quadro 16x - SIP Phone show "Network error" when dialing
I have 2 SIP phone devices: Linksys SPA942 and Moinstone Stonehenge IP250, on both i have Extension 9520 and extension 9518...
When tryind to dial for each other shows on display: "Network error". How to fix it???? |
|
|
|
04-01-2009, 09:55 PM
|
#2 |
|
Quadro Architect
Join Date: Jun 2006
Location: Around myself
Posts: 2,083
|
You cannot have the same username on two different phones, and register both on the Quadro. Only one phone can be registered on any on the IP Lines of the Quadro at the same time. If you configure two phones to register on the same IP Line, they will periodically kick out one another, and the system will never work.
Leave the 9520 only on Linksys SPA942, and the 9518 - only on Moinstone Stonehenge IP250, and they should be able to each other. |
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| incoming calls with "unknown number" | dolmen | Tips and Tricks | 5 | 12-22-2008 10:13 PM |
| Quadro 2X "The Number You Have Dialled Is Unavailable" | P00HB33R | Troubleshooting and Problems | 1 | 12-01-2008 05:18 PM |
| Voice mail message sound is "dial tone" except words. | riskdata | Troubleshooting and Problems | 2 | 10-20-2008 05:09 PM |
| Use built-in TFTP server to provision "Other" phones | mobidutch | Suggestions and Feedback | 3 | 03-18-2008 02:37 PM |
| How to "transfer" calls between IP and analog lines? | mobidutch | 'How Do I' Questions | 4 | 03-17-2008 07:59 AM |
Linear Mode
