Paging system

phoenixschool · 10-19-2006, 04:36 PM

I have a Quadro 16x with snom 320/360s and we would like to have the ability to make announcements via the phone system. I found a VOIP loudspeaker ( http://www.cyberdata.net/products/vo...udspeakeramp.h tml) and wanted to know if there was a way to simultaneously call two extensions at the same time.I looked at the intercom feature, but this only seems to work in the absence of other Caller ID based services, such as many extension ringing.These VOIP loudspeakers auto-answer calls, so all I need is the ability to place a call to multiple endpoints at once. Any suggestions?Edited by: phoenixschool

davrays · 10-20-2006, 08:53 AM

Hi Kevin,

did you try to use the "Paging Group" extension type? ("Extension Management"->"Add"->"Type=Paging Group")

It is originally designed to be used with Aastra480e, Aastra480i and Snoms, but it might help in your case too.

regards,

DVR

phoenixschool · 10-23-2006, 09:37 AM

Thanks DVR,
Yes, that should work. I'll give this a shot as soon as I get the VOIP loudspeakers.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using Paging Zone Controller	shagan	Hardware Interoperability	1	08-09-2007 11:52 PM
Streamline Paging/Pickup UI	threebit	Suggestions and Feedback	1	07-31-2007 01:13 AM
SYSTEM OVERLOAD	datamine	Troubleshooting and Problems	3	06-19-2007 05:18 AM
Paging group with Aastra phone	Sparxnet	Troubleshooting and Problems	2	04-23-2007 05:58 AM
System Overloaded	pdiaz	Troubleshooting and Problems	6	07-28-2006 02:55 AM

10-19-2006, 04:36 PM	#1
phoenixschool Junior Member Join Date: Sep 2006 Location: Greenville Posts: 3	I have a Quadro 16x with snom 320/360s and we would like to have the ability to make announcements via the phone system. I found a VOIP loudspeaker ( http://www.cyberdata.net/products/vo...udspeakeramp.h tml) and wanted to know if there was a way to simultaneously call two extensions at the same time.I looked at the intercom feature, but this only seems to work in the absence of other Caller ID based services, such as many extension ringing.These VOIP loudspeakers auto-answer calls, so all I need is the ability to place a call to multiple endpoints at once. Any suggestions?Edited by: phoenixschool

10-20-2006, 08:53 AM	#2
davrays Quadro Architect Join Date: Jun 2006 Location: Around myself Posts: 2,083	Hi Kevin, did you try to use the "Paging Group" extension type? ("Extension Management"->"Add"->"Type=Paging Group") It is originally designed to be used with Aastra480e, Aastra480i and Snoms, but it might help in your case too. regards, DVR

10-23-2006, 09:37 AM	#3
phoenixschool Junior Member Join Date: Sep 2006 Location: Greenville Posts: 3	Thanks DVR, Yes, that should work. I'll give this a shot as soon as I get the VOIP loudspeakers.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)