Method of Re-Registering SIP accounts

alfredp · 04-18-2010, 11:10 PM

Hello,
Recently I've had to change the configuration of my Quadro 2X ..
Its now sitting behind a Modem/Router with a static IP to it and 3 IP phones.

For one reason or another I've had to reboot/restart the Modem/Router on a number of occassions, and I find that after this event Quadro doesn't re-register the SIP accounts.

Is there a way of forcing a re-registering of the SIP accounts without the need to reboot the Quadro?? and what about the IP phones?? at the moment I go through and reboot each phone as well.

Thanks

narek · 04-21-2010, 01:36 PM

Hello

There are two little tricks to do that.
1. Go to the Extension Management, edit the needed extension and disable then enable "Registration on SIP Server" on SIP settings page.
2. You can go to the Telephony->SIP Settings page and change UDP/TCP port save and rechanged to old one.
Both this tricks will force for re-registering

Regards
Narek

04-18-2010, 11:10 PM	#1
alfredp Junior Member Join Date: Jan 2007 Posts: 28	Method of Re-Registering SIP accounts Hello, Recently I've had to change the configuration of my Quadro 2X .. Its now sitting behind a Modem/Router with a static IP to it and 3 IP phones. For one reason or another I've had to reboot/restart the Modem/Router on a number of occassions, and I find that after this event Quadro doesn't re-register the SIP accounts. Is there a way of forcing a re-registering of the SIP accounts without the need to reboot the Quadro?? and what about the IP phones?? at the moment I go through and reboot each phone as well. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
call forwarding method	HTOIP	Installation	2	12-23-2009 09:30 AM
Aastra 55i not registering voicemail	ccopley	Installation	4	03-16-2009 02:26 PM
Alternate method of uploading a wav file	ediggin	'How Do I' Questions	1	05-19-2008 04:16 PM
ITSP Accounts & AutoAttendants	debjy	'How Do I' Questions	1	09-24-2007 10:54 PM
Registering problems to the VoIP Carrier	cella	Troubleshooting and Problems	2	04-27-2007 08:02 PM

04-21-2010, 01:36 PM	#2
narek Junior Member Join Date: Apr 2008 Posts: 11	Hello There are two little tricks to do that. 1. Go to the Extension Management, edit the needed extension and disable then enable "Registration on SIP Server" on SIP settings page. 2. You can go to the Telephony->SIP Settings page and change UDP/TCP port save and rechanged to old one. Both this tricks will force for re-registering Regards Narek

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)