Voice Mail Codec through Email

brennja · 02-22-2007, 08:16 AM

How do I change the Voice Mail codec used when sending a voice mail message as an attachment.

I tried different codecs under "Voice Mail Common Settings", but they were all received as ULAW codecs.

ULAW codec is not compatible when I try to play it on a Windows Mobile 5 device.

ghutton · 03-01-2007, 04:25 AM

While I do not Epygi's voice mail for a bunch of reasons I will not get into. I use Broadvoice as my VoIP provider and use thier voice mail along with this free service http://www.magikinfo.com/vm2wm/which converts audio into several optional codecs. I use MMS to my cell phone and it works very well.

Hope this helps.

-Glenn

hiebpbx · 03-08-2007, 06:40 AM

Hi Ghutton,

I would like the list of the things you would like changed on the Epygi VM system. It is the only way we can have changes.

I am frustrated with fighting with codecs. Where do i download them for my users for Media Player?
Voicemail navigation. Its toocomplicated, and there is no FFWD or REWIND. i want to have it the same as our Mobility provider (if that requires me to customize it so be it).
Want common voicemail for 5 extensions (many ext ringing) with simple retrieval >*0 then password from any of themultiple ext's

Curt

davrays · 04-12-2007, 07:00 AM

Well, thanks for suggestions.

But I never though somebody could have problems with PCMU: it is included by deafult almost everywhere. Thats why Quadro doesn't let to configure the codec of the "VM to email" - it is fixed to PCMU, and nobody else had a problem with that.

VM navigation has FWD and REWIND - you can go back and forth using "4" and "6" buttons. Or you mean navigation inside the single message?

davrays · 04-12-2007, 07:02 AM

Anyway, we are working on some redesign of ourVM system. Not sure when it will be included.

03-08-2007, 06:40 AM	#3
hiebpbx Junior Member Join Date: Feb 2007 Location: Sperling Posts: 16	Hi Ghutton, I would like the list of the things you would like changed on the Epygi VM system. It is the only way we can have changes. I am frustrated with fighting with codecs. Where do i download them for my users for Media Player? Voicemail navigation. Its toocomplicated, and there is no FFWD or REWIND. i want to have it the same as our Mobility provider (if that requires me to customize it so be it). Want common voicemail for 5 extensions (many ext ringing) with simple retrieval >*0 then password from any of themultiple ext's Curt

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Voice Mail Time Out	pluft	Troubleshooting and Problems	13	11-30-2007 03:30 AM
transfer to voice mail	Sparxnet	'How Do I' Questions	2	04-21-2007 05:30 AM
Option to login to voice mail	awhite	Suggestions and Feedback	3	02-03-2007 08:25 AM
Listen to voice mail from my PC	warren	'How Do I' Questions	0	09-26-2006 06:10 PM
Voice mail impact from power outage	warren	Tips and Tricks	0	09-26-2006 05:42 PM

02-22-2007, 08:16 AM	#1
brennja Junior Member Join Date: Jan 2007 Posts: 11	How do I change the Voice Mail codec used when sending a voice mail message as an attachment. I tried different codecs under "Voice Mail Common Settings", but they were all received as ULAW codecs. ULAW codec is not compatible when I try to play it on a Windows Mobile 5 device.

03-01-2007, 04:25 AM	#2
ghutton Junior Member Join Date: Jul 2006 Posts: 3	While I do not Epygi's voice mail for a bunch of reasons I will not get into. I use Broadvoice as my VoIP provider and use thier voice mail along with this free service http://www.magikinfo.com/vm2wm/which converts audio into several optional codecs. I use MMS to my cell phone and it works very well. Hope this helps. -Glenn

04-12-2007, 07:00 AM	#4
davrays Quadro Architect Join Date: Jun 2006 Location: Around myself Posts: 2,083	Well, thanks for suggestions. But I never though somebody could have problems with PCMU: it is included by deafult almost everywhere. Thats why Quadro doesn't let to configure the codec of the "VM to email" - it is fixed to PCMU, and nobody else had a problem with that. VM navigation has FWD and REWIND - you can go back and forth using "4" and "6" buttons. Or you mean navigation inside the single message?

04-12-2007, 07:02 AM	#5
davrays Quadro Architect Join Date: Jun 2006 Location: Around myself Posts: 2,083	Anyway, we are working on some redesign of ourVM system. Not sure when it will be included.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)