How do I update the firmware on a QuadroFXO?

EnsurICT · 06-27-2011, 10:35 AM

I used the following .bin file to try and update the firmware on my QuadroFXO:

http://support.epygi.com/index.php?_...&nav=0,214,275

I saved the .bin file to my harddrive and loaded that image onto the update page on my QuadroFXO but the following msg:

The upload image is invalid.

What am I doing wrong? This should be very simple.

hrant · 06-27-2011, 12:55 PM

Check the size of the downloaded file and be sure it is the same as mentioned on the web.

06-27-2011, 10:35 AM	#1
EnsurICT Junior Member Join Date: Aug 2008 Posts: 6	How do I update the firmware on a QuadroFXO? I used the following .bin file to try and update the firmware on my QuadroFXO: http://support.epygi.com/index.php?_...&nav=0,214,275 I saved the .bin file to my harddrive and loaded that image onto the update page on my QuadroFXO but the following msg: The upload image is invalid. What am I doing wrong? This should be very simple.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Snom 300 Firmware Update	bsnquadro	Troubleshooting and Problems	9	03-09-2010 09:07 AM
UPDATe firmware problem	walid	Troubleshooting and Problems	8	03-06-2009 05:03 PM
update firmware	dubnik	'How Do I' Questions	1	01-15-2009 09:19 PM
Update firmware by Internet	Amper	Troubleshooting and Problems	1	04-22-2008 07:13 AM
snom firmware update on 4.1.18	dmaunder	Installation	1	04-12-2007 09:10 PM

06-27-2011, 12:55 PM	#2
hrant Administrator Join Date: Sep 2006 Posts: 510	Check the size of the downloaded file and be sure it is the same as mentioned on the web.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)