Prefix Tag on call Routing

nlucas · 06-27-2007, 03:20 AM

hi! I want to crate a rule to when an incoming SIP call arrives with the correct pattern (90??) discard de 2 first digits and dial the 3rd and 4th digit's as an extension, i was trying the "Prefix tags" on the Administration Manual but gives me an error on the prefix!

i was trying like this
("Route all incoming SIP calls to Call Routing" is selected)

Pattern: 90??
NDS: 2
Prefix: <dialednum:[3-end]>
Call type: Pbx

or

Pattern: 90??

NDS: 2

Prefix: <dialednum:[3-4]>

Call type: Pbx

for example when arrives a SIP call whit the pattern 9040, the 1st and 2nd digitis will be discard and the 3rd and 4th digits will be dial, so it rings on the extension 40!

Is this possible?Am I doing right?

Best Regards! Tks

threebit · 06-27-2007, 01:30 PM

I don't think you need the Prefix: <dialednum:......> line.
Just set:
Pattern: 90??
NDS: 2

This will strip off the first 2 digits leaving just the last two.

Are you doing this on the receiving Quadro, or the Quadro that is sending the call?

nlucas · 06-28-2007, 04:09 AM

Hi! it's on the receiving Quadro, yes i realize that don't need the prefix, and it's already working...! Quadro have one of the best "tools" to work..the Routing table! [img]smileys/smiley32.gif[/img] However...just to understand the "tags" thing...it's realy implemented on call routing?

Tanks and best regards!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
IVR to call routing table	andy.collins	VXML Scripting on Quadro	14	10-02-2007 01:24 PM
Call routing based on incoming DID	wesleyit	'How Do I' Questions	3	12-03-2006 08:15 PM
Include the prefix "0" to recall (2)	support.ephonenet	'How Do I' Questions	1	11-07-2006 01:55 AM
call routing to Voip provider	alraiky	Troubleshooting and Problems	0	11-06-2006 02:25 PM
Call Routing giving me frustration	atlantic	'How Do I' Questions	2	10-20-2006 08:04 AM

06-27-2007, 03:20 AM	#1
nlucas Junior Member Join Date: Nov 2006 Posts: 28	hi! I want to crate a rule to when an incoming SIP call arrives with the correct pattern (90??) discard de 2 first digits and dial the 3rd and 4th digit's as an extension, i was trying the "Prefix tags" on the Administration Manual but gives me an error on the prefix! i was trying like this ("Route all incoming SIP calls to Call Routing" is selected) Pattern: 90?? NDS: 2 Prefix: <dialednum:[3-end]> Call type: Pbx or Pattern: 90?? NDS: 2 Prefix: <dialednum:[3-4]> Call type: Pbx for example when arrives a SIP call whit the pattern 9040, the 1st and 2nd digitis will be discard and the 3rd and 4th digits will be dial, so it rings on the extension 40! Is this possible?Am I doing right? Best Regards! Tks

06-27-2007, 01:30 PM	#2
threebit Moderator Join Date: Jun 2006 Location: New Zealand Posts: 210	I don't think you need the Prefix: <dialednum:......> line. Just set: Pattern: 90?? NDS: 2 This will strip off the first 2 digits leaving just the last two. Are you doing this on the receiving Quadro, or the Quadro that is sending the call?

06-28-2007, 04:09 AM	#3
nlucas Junior Member Join Date: Nov 2006 Posts: 28	Hi! it's on the receiving Quadro, yes i realize that don't need the prefix, and it's already working...! Quadro have one of the best "tools" to work..the Routing table! [img]smileys/smiley32.gif[/img] However...just to understand the "tags" thing...it's realy implemented on call routing? Tanks and best regards!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)