Upgrade 2.3 firmware on 2X

stakano · 07-10-2007, 06:58 PM

I have a 2X that has really old firmware.

Boot loader: 2.2.15/Release
Firmware Version: 2.3.30/Release

I'm looking to upgrade to 4.x, but seems like this doesn't meet the requirements as everything I see says 2.4.34 minimum. Even to go to 3.0.35 requires 2.4.n.

Can anyone help me get a version that I can upgrade to, so I can go to 4.x?

Thanks.

davrays · 08-01-2007, 01:54 AM

Hello Satoshi,

if you still need this FW, please contact me (e-mail is in theprofile) and I'll open a link for you to download the needed firmware.

Best regards,

David

AramK · 08-01-2007, 02:43 AM

If I'am not mistaken, we already solved this firmware upgrade problem based on TSS case.

Derek vincent · 04-17-2009, 03:25 PM

I need the latest firmware for a quadro 2X can you point me in the right direction to download the latest firmware files please?

Derek

techkey · 04-20-2009, 06:17 AM

Derek,

Go to the Support Center » Downloads » IP PBX Products » Quadro2x, 2xi » Software. The release notes and code are there.

davrays · 04-21-2009, 04:02 PM

An additional note for Derek - you may need to register your 2x to see all those links.

04-20-2009, 06:17 AM	#5
techkey Junior Member Join Date: Sep 2008 Posts: 11	Upgrade 2.3 firmware on 2X Derek, Go to the Support Center » Downloads » IP PBX Products » Quadro2x, 2xi » Software. The release notes and code are there.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Snom Ver 7.x Firmware	liberty	Hardware Interoperability	28	09-01-2008 11:29 AM
No dialing after upgrade	derekkmark	Troubleshooting and Problems	12	11-27-2007 10:20 PM
Extensions drops after 4.1.28 upgrade	brainbeats	Troubleshooting and Problems	1	07-24-2007 10:55 PM
4.1 Upgrade	ivscorp	General Discussions	0	02-18-2007 03:51 PM
NEW Firmware 4.1.0	jloeken	Suggestions and Feedback	1	11-16-2006 12:37 PM

07-10-2007, 06:58 PM	#1
stakano Junior Member Join Date: Jul 2007 Posts: 29	I have a 2X that has really old firmware. Boot loader: 2.2.15/Release Firmware Version: 2.3.30/Release I'm looking to upgrade to 4.x, but seems like this doesn't meet the requirements as everything I see says 2.4.34 minimum. Even to go to 3.0.35 requires 2.4.n. Can anyone help me get a version that I can upgrade to, so I can go to 4.x? Thanks.

08-01-2007, 01:54 AM	#2
davrays Quadro Architect Join Date: Jun 2006 Location: Around myself Posts: 2,083	Hello Satoshi, if you still need this FW, please contact me (e-mail is in theprofile) and I'll open a link for you to download the needed firmware. Best regards, David

08-01-2007, 02:43 AM	#3
AramK Senior Member Join Date: Sep 2006 Location: Yerevan Posts: 796	If I'am not mistaken, we already solved this firmware upgrade problem based on TSS case.

04-17-2009, 03:25 PM	#4
Derek vincent Junior Member Join Date: Apr 2009 Posts: 1	I need the latest firmware for a quadro 2X can you point me in the right direction to download the latest firmware files please? Derek

04-21-2009, 04:02 PM	#6
davrays Quadro Architect Join Date: Jun 2006 Location: Around myself Posts: 2,083	An additional note for Derek - you may need to register your 2x to see all those links.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)