Latest firmware 4.1.33 very slow with AA

jetsupport · 08-29-2007, 10:09 PM

Hi,

A few days ago we upgraded to firmware V 4.1.33 (from 4.1.28). Since the upgrade we have noticed a considerable delay with the AA feature when routed thoughour custom IVR scenario. Basically when the callergets to the point of selecting the option they want (which should then call the extension) there is a delay of up to 12 seconds before the extension begins to ring.

This was definatley not happening with the previous firmware.

AramK · 09-04-2007, 05:21 AM

Could you please open a TSS ticket and attach some logs there ? We need to investigate that problem in our testlab, because the only complains we have regarding thisfeature is from you.

jetsupport · 09-04-2007, 01:36 PM

After some further investigation it seems that the issue is not with the firmware but with Hot Call 1.7 (which was the reason for upgrading the firmware).

Despite all attempts to install Hot Call 1.7as advised in previous forum posts, it still gives a "type mismatch" error whenever it is launched or there is an incoming call.

Hot Callwasattached to extension 15 which is also the incoming line at the end of the AA. I have now uninstalled Hot Call and the delay on extension 15 ringing has now disappeared.

Thanks for your reply just the same.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Upgrade 2.3 firmware on 2X	stakano	'How Do I' Questions	5	04-21-2009 04:02 PM
Snom Ver 7.x Firmware	liberty	Hardware Interoperability	28	09-01-2008 11:29 AM
snom firmware update on 4.1.18	dmaunder	Installation	1	04-12-2007 09:10 PM
NEW Firmware 4.1.0	jloeken	Suggestions and Feedback	1	11-16-2006 12:37 PM
FXO slow to ring extensions	oltconsulting	Troubleshooting and Problems	9	10-10-2006 11:51 AM

08-29-2007, 10:09 PM	#1
jetsupport Junior Member Join Date: Jul 2007 Location: Rosebery, NSW Posts: 7	Hi, A few days ago we upgraded to firmware V 4.1.33 (from 4.1.28). Since the upgrade we have noticed a considerable delay with the AA feature when routed thoughour custom IVR scenario. Basically when the callergets to the point of selecting the option they want (which should then call the extension) there is a delay of up to 12 seconds before the extension begins to ring. This was definatley not happening with the previous firmware.

09-04-2007, 05:21 AM	#2
AramK Senior Member Join Date: Sep 2006 Location: Yerevan Posts: 796	Could you please open a TSS ticket and attach some logs there ? We need to investigate that problem in our testlab, because the only complains we have regarding thisfeature is from you.

09-04-2007, 01:36 PM	#3
jetsupport Junior Member Join Date: Jul 2007 Location: Rosebery, NSW Posts: 7	After some further investigation it seems that the issue is not with the firmware but with Hot Call 1.7 (which was the reason for upgrading the firmware). Despite all attempts to install Hot Call 1.7as advised in previous forum posts, it still gives a "type mismatch" error whenever it is launched or there is an incoming call. Hot Callwasattached to extension 15 which is also the incoming line at the end of the AA. I have now uninstalled Hot Call and the delay on extension 15 ringing has now disappeared. Thanks for your reply just the same.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)