Managed outgoing calls

Synertic · 11-23-2007, 11:20 AM

Hi all, we have 2 company that uses the same system (Quadro2x), we must
secure access to our IP line to the employee of the other company and
blocked access to theys lines of business to our employee. Is there a way
to give access to a certain extention to certain line only

paulk · 11-25-2007, 02:29 PM

Hi,
so you want to allow certain extensions use certain Trunk lines ( FXO or ISDN? )....this can be done in the call routing table. Can you tell us more details about what type of lines you have and I'll try and give an example route table rule?

Thanks,

Paul

Synertic · 11-26-2007, 08:51 AM

I use only IP-PSTN line

paulk · 11-26-2007, 12:15 PM

OK, I;ll use ISDN as my example as that's all I've installed.

So enter a new route;

Pattern: *
NDS: 0
Filter on Caller / Call Type / Modify Caller ID: Tick this.

On the next page is:

Port ID: Select the line you want to use here.

On the next page:

Inbound Caller Pattern: put the extensions you want to use here.

That should be it. Give it a try and let us know.

Regards,

Paul

AramK · 11-27-2007, 01:54 AM

Please also get familiar to "Preventing Unauthorized Calls on the Quadro" document, that is placed in our WEB, under "Downloads" section. Especially pay attention to the "Using Filters on Call Routing Rules" part.Edited by: aramk

Synertic · 11-27-2007, 07:36 AM

Thanks All, it's work

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Modifying Caller ID for outgoing calls	shagan	General Discussions	3	09-06-2007 12:53 AM
2xi Outgoing ISDN CLI	darylp	'How Do I' Questions	1	04-30-2007 04:31 AM
Lag time in outgoing calls	etolentino	Troubleshooting and Problems	2	10-30-2006 09:06 AM
Filtering PSTN outgoing calls	daycohost	'How Do I' Questions	1	07-19-2006 08:02 AM

11-23-2007, 11:20 AM	#1
Synertic Senior Member Join Date: Apr 2007 Location: Acton Vale, Quebec, Canada Posts: 127	Hi all, we have 2 company that uses the same system (Quadro2x), we must secure access to our IP line to the employee of the other company and blocked access to theys lines of business to our employee. Is there a way to give access to a certain extention to certain line only

11-25-2007, 02:29 PM	#2
paulk Senior Member Join Date: Nov 2007 Posts: 106	Hi, so you want to allow certain extensions use certain Trunk lines ( FXO or ISDN? )....this can be done in the call routing table. Can you tell us more details about what type of lines you have and I'll try and give an example route table rule? Thanks, Paul

11-26-2007, 08:51 AM	#3
Synertic Senior Member Join Date: Apr 2007 Location: Acton Vale, Quebec, Canada Posts: 127	I use only IP-PSTN line

11-26-2007, 12:15 PM	#4
paulk Senior Member Join Date: Nov 2007 Posts: 106	OK, I;ll use ISDN as my example as that's all I've installed. So enter a new route; Pattern: * NDS: 0 Filter on Caller / Call Type / Modify Caller ID: Tick this. On the next page is: Port ID: Select the line you want to use here. On the next page: Inbound Caller Pattern: put the extensions you want to use here. That should be it. Give it a try and let us know. Regards, Paul

11-27-2007, 01:54 AM	#5
AramK Senior Member Join Date: Sep 2006 Location: Yerevan Posts: 796	Please also get familiar to "Preventing Unauthorized Calls on the Quadro" document, that is placed in our WEB, under "Downloads" section. Especially pay attention to the "Using Filters on Call Routing Rules" part.Edited by: aramk

11-27-2007, 07:36 AM	#6
Synertic Senior Member Join Date: Apr 2007 Location: Acton Vale, Quebec, Canada Posts: 127	Thanks All, it's work

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)