How to access a file server from the LAN side

max.siegrist · 03-05-2008, 07:25 PM

Hi all,

Scenario:
* Quadro located in the LAN (WAN port attached to LAN switch)
* File server located in the LAN (attached to LAN switch)
* IP phones (snom300) located in the Quadro-LAN
* Quadro NAT=on, Firewall=off
* User Notebook attached on the 2nd LAN port of the snom300 IP phone

Case:
User wants to "work" on the file server (...)

Question:
What Quadro config. settings are needed to work transparently from
Quadro-LAN side accessing any LAN resources (pass though the data
traffic Quadro LAN <--> Quadro WAN) ?

Thanks for any support!

Max

AramK · 03-06-2008, 10:34 AM

In default configuration Quadro is trasparent for FTP, but there is a blocking rule for "MS File Sharing", that you can disable from Quadro login "Internet Uplink -> Filtering Rule -> Outgoing Traffic" page.

max.siegrist · 03-07-2008, 03:09 AM

Aram,

Thanks - I already tried that but it doesn't work, ...

BR, Max

AramK · 03-07-2008, 06:07 AM

Max, then it is connected to your network setup. If you'll send your network diagram to me and explain your requirements, I'll try to help you. Use "send a message via e-mail to aramk" link in my profile.

03-05-2008, 07:25 PM	#1
max.siegrist Junior Member Join Date: Nov 2006 Location: Zug Posts: 2	How to access a file server from the LAN side Hi all, Scenario: * Quadro located in the LAN (WAN port attached to LAN switch) * File server located in the LAN (attached to LAN switch) * IP phones (snom300) located in the Quadro-LAN * Quadro NAT=on, Firewall=off * User Notebook attached on the 2nd LAN port of the snom300 IP phone Case: User wants to "work" on the file server (...) Question: What Quadro config. settings are needed to work transparently from Quadro-LAN side accessing any LAN resources (pass though the data traffic Quadro LAN <--> Quadro WAN) ? Thanks for any support! Max

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Management Access Port	threebit	Suggestions and Feedback	2	02-01-2007 06:23 PM
Can’t access new auto attendant	derrickconner	Troubleshooting and Problems	0	11-28-2006 10:18 AM
Access Codes	jarel5	'How Do I' Questions	2	10-20-2006 07:33 AM
PSTN access code	guillermobmi	Suggestions and Feedback	3	09-06-2006 08:50 AM
Restricted PSTN access	voip advantage	'How Do I' Questions	0	08-30-2006 02:53 AM

03-06-2008, 10:34 AM	#2
AramK Senior Member Join Date: Sep 2006 Location: Yerevan Posts: 796	In default configuration Quadro is trasparent for FTP, but there is a blocking rule for "MS File Sharing", that you can disable from Quadro login "Internet Uplink -> Filtering Rule -> Outgoing Traffic" page.

03-07-2008, 03:09 AM	#3
max.siegrist Junior Member Join Date: Nov 2006 Location: Zug Posts: 2	Aram, Thanks - I already tried that but it doesn't work, ... BR, Max

03-07-2008, 06:07 AM	#4
AramK Senior Member Join Date: Sep 2006 Location: Yerevan Posts: 796	Max, then it is connected to your network setup. If you'll send your network diagram to me and explain your requirements, I'll try to help you. Use "send a message via e-mail to aramk" link in my profile.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)