5.0.x Software

lansmart · 04-02-2008, 11:16 PM

Would anyone from Epygi care to comment on the architecture and features of the "new" release we keep hearing about in the forums. The info posted is very fragmented.

Having a product and feature roadmap is essential to keeping the reseller community onboard so we can plan for the future and help identify opportunities that we may otherwise ignore because of known limitations with the existing 4.x platform.

For instance, I recently decided not to pursue an opportunity for a 80 seat organisation as I did not believe a stacked solution would offer sufficient benefit to the customer over an alternative solution from another reseller. Then I find out a month or so later that a bigger Quadro will be available some time (soon?, I still don't know when). As this was an RFP, this may not have been a dealbreaker and I may have pursued the opportunity on the promise of being able to deliver.

Also, I could not search for 5.0 or 5.0.x in the forums, 0 results returned !!!

davrays · 06-09-2008, 06:51 PM

We'll publish the new features list on 5.0.x soon.

KSComs · 06-29-2008, 01:23 AM

Will Hot Desking be a feature that will be natively implemented on the Quadro's Firmware 5 using the enhanced capacity of the Snom Hot Desking feature within 7.1.33 as per the link?

This feature enabled will be ideal for Call Centres.

http://wiki.snom.com/Hot_Desking

Regards

Kevin

lansmart · 06-30-2008, 08:43 AM

Bah, 7.1.33

It break my 320!!!!

Seriously though, I had to TFTP a new image after an apparently "successful" upgrade. If success means hanging on the "Please wait...." message after restarting then yes, my upgrade was utterly successful.

And SNOM pulled this firmware at least once before because of upgrade issues.... I am not endeared to these guys.

KSComs · 06-30-2008, 10:45 AM

I just tftp'd 2 times to get around it....

Regards,

Kevin

Janousek · 08-08-2008, 04:45 PM

SW QUADRO 2,4,16x version 5.0.11 has problem with PRINT and display of the table of Extensions Management and Call Routing Table. The new format of web site with vertical limit give not possibility print! whole table with all rows. Is it possible the format of those web-sites to give back? Thanks.

davrays · 08-08-2008, 07:42 PM

Well, looks like our GUI enhancement has some drawbacks...

Thanks for noting the problem, we'll think what we can do. Probably can make the tables view configurable, or something this kind.

However there is no possibility to show the tables the old way on the current 5.0.11.

If you want to print them now, the best way is to select the content of the whole table, copy that, then paste in MS Word. Delete the first column, and print. This could be a temporary solution.

Janousek · 08-08-2008, 10:00 PM

Thanks for your response. But I think, the both sites without scrollbars, that was better.

teamnet · 08-11-2008, 08:41 AM

My 2 cents - scroll bars, much better.

Better yet, some sort of "edit" icon next to each extension. It's not like you select multiple ones to edit anyway....

Also, some easy way of transitioning between the administrative edit and the user "view" e.g. voicemail settings. It's a pain to have to jump around different parts of the GUI for settings related to the same object. Even better again, just add the user editable stuff to the administrative stuff. Hope this makes sense.

teamnet · 08-11-2008, 08:45 AM

And - put a link between the line settings and the extension settings menus. You should never need to hit that immensely frustrating "Back" button (not the browser back button) which tends to take you "back" to a place I rarely seem to need to go "back" to. How about "Lines list" and "Extensions list" instead of "Back"?

View Poll Results: What do you think about the GUI changes in Extensions and Routing tables in 5.0.x sw?
The old view (with long and easily printable table) was better	2	28.57%
The new view (with scrollbars) is more useful	5	71.43%
Voters: 7. You may not vote on this poll

04-02-2008, 11:16 PM	#1
lansmart Member Join Date: Apr 2007 Posts: 30	5.0.x Software Would anyone from Epygi care to comment on the architecture and features of the "new" release we keep hearing about in the forums. The info posted is very fragmented. Having a product and feature roadmap is essential to keeping the reseller community onboard so we can plan for the future and help identify opportunities that we may otherwise ignore because of known limitations with the existing 4.x platform. For instance, I recently decided not to pursue an opportunity for a 80 seat organisation as I did not believe a stacked solution would offer sufficient benefit to the customer over an alternative solution from another reseller. Then I find out a month or so later that a bigger Quadro will be available some time (soon?, I still don't know when). As this was an RFP, this may not have been a dealbreaker and I may have pursued the opportunity on the promise of being able to deliver. Also, I could not search for 5.0 or 5.0.x in the forums, 0 results returned !!!

08-08-2008, 04:45 PM	#6
Janousek Junior Member Join Date: Feb 2007 Location: Praha, CZ Posts: 17	Problem with print of whole table - Extension Management, Call Routing Table SW QUADRO 2,4,16x version 5.0.11 has problem with PRINT and display of the table of Extensions Management and Call Routing Table. The new format of web site with vertical limit give not possibility print! whole table with all rows. Is it possible the format of those web-sites to give back? Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Call accounting software	bpcomputers	General Discussions	15	03-09-2009 11:25 PM
Quadro2x Software Update	warren	Announcements	0	07-18-2007 11:54 AM
Radius Cat Billing Software	rulrich	Troubleshooting and Problems	0	05-08-2007 03:07 AM
Setup VPN with Software Client	mwitmer	Tips and Tricks	0	11-14-2006 12:13 AM
FORUM SOFTWARE	bhummel	General Discussions	1	06-27-2006 03:13 AM

06-09-2008, 06:51 PM	#2
davrays Quadro Architect Join Date: Jun 2006 Location: Around myself Posts: 2,083	We'll publish the new features list on 5.0.x soon.

06-29-2008, 01:23 AM	#3
KSComs Senior Member Join Date: Jul 2007 Location: Oakleigh, Victoria Posts: 1,485	Will Hot Desking be a feature that will be natively implemented on the Quadro's Firmware 5 using the enhanced capacity of the Snom Hot Desking feature within 7.1.33 as per the link? This feature enabled will be ideal for Call Centres. http://wiki.snom.com/Hot_Desking Regards Kevin

06-30-2008, 08:43 AM	#4
lansmart Member Join Date: Apr 2007 Posts: 30	Bah, 7.1.33 It break my 320!!!! Seriously though, I had to TFTP a new image after an apparently "successful" upgrade. If success means hanging on the "Please wait...." message after restarting then yes, my upgrade was utterly successful. And SNOM pulled this firmware at least once before because of upgrade issues.... I am not endeared to these guys.

06-30-2008, 10:45 AM	#5
KSComs Senior Member Join Date: Jul 2007 Location: Oakleigh, Victoria Posts: 1,485	I just tftp'd 2 times to get around it.... Regards, Kevin

08-08-2008, 07:42 PM	#7
davrays Quadro Architect Join Date: Jun 2006 Location: Around myself Posts: 2,083	Well, looks like our GUI enhancement has some drawbacks... Thanks for noting the problem, we'll think what we can do. Probably can make the tables view configurable, or something this kind. However there is no possibility to show the tables the old way on the current 5.0.11. If you want to print them now, the best way is to select the content of the whole table, copy that, then paste in MS Word. Delete the first column, and print. This could be a temporary solution.

08-08-2008, 10:00 PM	#8
Janousek Junior Member Join Date: Feb 2007 Location: Praha, CZ Posts: 17	Thanks for your response. But I think, the both sites without scrollbars, that was better.

08-11-2008, 08:41 AM	#9
teamnet Member Join Date: Jun 2008 Location: Wellington, NZ Posts: 37	My 2 cents - scroll bars, much better. Better yet, some sort of "edit" icon next to each extension. It's not like you select multiple ones to edit anyway.... Also, some easy way of transitioning between the administrative edit and the user "view" e.g. voicemail settings. It's a pain to have to jump around different parts of the GUI for settings related to the same object. Even better again, just add the user editable stuff to the administrative stuff. Hope this makes sense.

08-11-2008, 08:45 AM	#10
teamnet Member Join Date: Jun 2008 Location: Wellington, NZ Posts: 37	And - put a link between the line settings and the extension settings menus. You should never need to hit that immensely frustrating "Back" button (not the browser back button) which tends to take you "back" to a place I rarely seem to need to go "back" to. How about "Lines list" and "Extensions list" instead of "Back"?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)